Efabless Repositories

this project is about pwm generator with a feature of variable duty cycle .

hada_2d1_3

RISC-V based sub system

Arduino pin compatible Single RISCV 32 Bit core Project

This is a design project led by the Mixed-Signal Analog Circuit Sensor Design group MLAB from University of Tennessee Knoxville. We have worked with five undergraduate students from the EECS department designing an Electrochemical Sensor chip to monitor water quality.

Physical Design of a 4 bit bidirectional counter

Projeto pmos.

This submission is for Ibtida-I which was selected for the First MPW Shuttle. Due to the issues in the clock tree synthesis in the first shuttle

Simple LED output which is based on an internal counter

Another push test

It Encode data Our priority vice

CRISPR/Cas9-induced site-specific DNA double-strand breaks (DSBs) can be repaired by homology-directed repair (HDR) or non-homologous end joining (NHEJ) pathways.

mcm_8outputs

This project focuses on design of a Current Starved VCO using Google Skywater (sky130) Technology node with operating voltage of 1.8V.

We are developing an optimized RV32I processor named RVCoreP

The openGFX430 is a synthesizable Graphic controller written in Verilog and tailored for the openMSP430 core.

test_anton_prob

test_anton_prob_real

VSCPU3x is a programmable system with 3 VSCPU cores and 24 kB SRAM.

Implementing the matrix operation of 16-point Walsh Transform using 8-bit inputs.

test project for aialra

LOOKING AT EFABLESS

test efabless project

QDI Asynchronous Control-Add Logic Demo

Uranus eFPGA with nonvolatile config in eFuse array. GFMPW1 rerun with fixes.

Based on the GMP-grade quality management system platform

ff

The 7 segment LED to help understand the process for our next innovative project. - Rowan Wysocki & Leila Suljevic

sdfsfsfdfdsfd

This is simple microprocessor. Instruction Set Architecture (ISA). The data bus is 16 bits wide. Address bus is 12 bits wide. The instructions are like old 8086 microprocessors. This tape-out has 8KB on-chip RAM. Targeted for calculator

A bidirectional counter is a sequential up/down That has the ability to count in both directions Either from some preset value as well as zero. In This up/down counter an external input is used for Using either up or down mode. Counter that can count in both directions either Up or Down depending on the state of their input control pin and...

We have implemented mixed signals blocks: A SAR-ADC with 12b and OSR=1...256 (decimation filter included)